4WD Fitout and Drawer Systems

DRIFTA CAR BACK COMBO

DCBC $AUD 1440
Drifta Car Back Combo
click photo for more info on this product...
THE CARBACK COMBO CAN FIT IN THE BACK OF MOST VEHICLES. SHOWN SINGLE DRAWER CARBACK KITCHEN ON RIGHT, DRAWER AND TABLE ON LEFT.
Sidewings not included. + $150 for sidewings click here for more detail.

Height
Length
Width
Weight
13.8 in
~ 35.4 - 43.3 in
~35.4 - 43.3 in
121.3 lb

click photo for more info on this product...
This is our new DCB Combo. It fits in the back of most 4wd’s, or utes. You get a Single Draw Drifta Car Back Kitchen (SD-DCB) , a single draw with flush fitting lockable latch with one divider inside, and a table (DCT) above it, (measures approx. 900 mm x 580 mm ). This is now one of our most popular products. It’s a magic setup, having a draw that can lift out to become your kitchen, and also a table. Perfect for travelling. Click photo left to see more info on this product.


click image for a video of an SD-DCB being folded up.
Your DCBC comes with : Single drawer carback kitchen, one drawer with single divider, one laminated freestanding table.
Extras you may like: extra divider, $15 each. Tie down points, $AUD 4 each. Single burner stove, $AUD 25. Any modifications + $AUD 50
Insert drawer AUD $55.
See faq page for more info on these drawer systems.
See setting up the SDCBC for more info on the kitchen

DRIFTA carback combo vertical DCBCV $ AUD 1490

click photo for more info on this product...
IDEAL FOR REAR OF WAGON STYLE 4WD'S, WHEN YOU WANT TO PUT FRIDGE ON FLOOR.

Height    ~550 - 650 mm
Length    ~ 850 - 1100 mm
Width    ~580 - 650 mm
Weight    50kgs

click photo for more info on this product...
What you do with these setups, if put your fridge in place, leave some air flow space, then measure to the wheelarch. Also the length and height you want, then we can make it up to suit. Mine shown here has a SD DCB (single drawer drifta car back ) on the bottom, a drawer on top, and a table on the left.


click here for a video of an SD-DCB being folded up.
Your DCBCV comes with : single drawer carback kitchen, one drawer with single divider, one laminated freestanding table.
Extras you may like: extra divider, $ AUD 15 each. Tie down points, $ AUD 4 each. Single burner stove, $ AUD 25. Any modifications + $ AUD 50. NEW – replacement drawer for kitchen $ AUD 150.
Insert drawer AUD $55
See faq page for more info on these drawer systems.
See SDDCB for setting-up info on the car back kitchen
SEE SETTING UP PAGE FOR MORE INFO ON THE DCBCV

New  Drifta 'insert drawer' $55
How good is this! We can make a small insert drawer, that sits on the top of any drawer. We put small plastic ‘rails’ on the sides of the drawer, and this small drawer can slide forward or back. It’s great for small items. Still room underneath for other things.. Generally, we make this about 80 mm high. See the sides of the drawer are carpeted, this is so it won’t slide around while you are driving.. you can take them out if you don’t need them all the time, ie, just put them in when you are going on a trip...

New
Drifta sidewings $150
Sidewing kit $85
Click here for more info..

DRIFTA two draw extended with table D2DE-WT $AUD 1290
(does not include sidewings $AUD 150 extra)

click photo for more info on this product...
THIS IS DESIGNED FOR TWIN CABS. EXTENDED LENGTH,WITH A 1200 X 550 mm TABLE.

Height~250 - 350 mm
Length~ 1200 - 1500 mm
Width~900 - 1100 mm
Weight45 kgs

click photo for more info on this product...
Photo shows sidewings fitted. These are not included as standard. Please contact me regarding options is you want these sidewings fitted. Click photo to see more info on this product. See FAQ page for more info on fitting etc.
Your D2DE-WT comes with : two full length drawers, one moveable divider each draw. one laminated freestanding table.
Extras you may like: extra divider, $AUD 15 each. Tie down points, $AUD 4 each. Sidewing kit $AUD 150, any modifications +$AUD 50
Insert drawer AUD $55.
See faq page for more info on these drawer systems.

DRIFTA two draw vertical D2D V $ AUD 840

click photo for more info on this product...
IDEAL FOR REAR OF WAGON STYLE 4WD'S, WHEN YOU WANT TO PUT YOUR FRIDGE ON THE FLOOR.

Height ~550 - 650 mm
Length ~ 850 - 1100 mm
Width ~580 - 650 mm
Weight 25 kgs

click photo for more info on this product...
How neat is that. Custom made to your size. What you do with these setups, if you put your fridge in place, leave some air flow space, then measure to the wheelarch. Also the length and height you want, then we can make it up to suit.
Your D2DV comes with : two drawers with single divider each drawer, flush fitting lockable latch.
Extras you may like: extra divider, $ AUD 15 each. Tie down points, $ AUD 4 each, any modifications +$ AUD 50.
Insert drawer AUD $55
See faq page for more info on these draw systems.
SEE SETTING UP PAGE FOR MORE INFO ON THE D2dV.

DRIFTA 2 DRAWER D2D $AUD 795

click photo for more info on this product...
Height:
Length:
Width:
Weight:
~250 - 300 mm
~750 - 1100 mm
~800 - 1100 mm
35 kgs

click photo for more info on this product...
Drifta 2 Drawer. We can make these drawers basically to any size. Comes with one moveable divider in each draw. Flush fitting lockable latch. Fully carpeted inside/ outside. Fit yourself, just slide it in. Can be locked down with tie down points and turnbuckles. Simple top quality drawers, for a reasonable price. You need to provide us with a width between the wheel arches, and a length / height.
Your D2D comes with : Two side by side drawers, one divider each drawer, flush fitting lockable latch, spring bolt at rear so drawer can be fully removed.
Extras you may like: extra divider, $AUD 15 each. Tie down points, $AUD 4 each. NEW – spare drawer (ie. swap camping draw for empty draw for around town) $AUD 150
Insert drawer AUD $55.
See faq page for more info on these drawer systems.
See setting up page for more info on the D2D.

SINGLE DRAWER - DRIFTA CAR BACK SD-DCB $AUD 680

click photo for more info on this product...
EXACTLY THE SAME AS A DCB, BUT WITH LONG SINGLE DRAWER ONLY. CUTLERY DRAWER INSIDE. MOSTLY FOR USE WITH CARBACK COMBO'S.

Height:
Length:
Width:
Weight:
300 mm
900 mm
480 mm
20 kgs

click photo for more info on this product...
Sits neatly in the back of the vehicle, or as part of our combo. Holds all your kitchen equipment, but can easily be lifted out and setup freestanding in about a minute. The advantage with the the Single Drawer Car Back kitchen, is when it is inside your vehicle, either on it's own, or as part of a combo, you can access the whole storage area inside, without having to pull it out. (as opposed to the standard carback kitchen, where you can't access the front two drawers without pulling it out) This makes it great for quick stops, when you just want to make a cuppa. Once you pull it right out, it really has the same features as the standard DCB. The setting up page has lots more info on this
 

click image for a video of the SD-DCB being folded up.
Your SD-DCBC comes with : Plastic tub and hand pump, cutlery drawer inside, plastic hose for jerry can, free Drifta stubby holder.
Extras you may like: Single burner stove, $AUD 25. Any modifications + $AUD 50. NEW - replacement drawer for kitchen $AUD 150
Insert drawer AUD $55.
See faq page for more info on these kitchens.
See setting up page for more info on the SD-DCB

Drifta FRIDGE BOX DFB $AUD 350
The drifta fridge box can be made to go with the vertical combo, or the drifta two drawer vertical. It’s a separate box, made from 12 mm ply, with a 15 mm top. Has holes in the back for ventilation. Pretty much is built around the fridge slide.

We use the ORS fridge slide ($330 to suit 40/50 ltr fridge) because it slides much better, has a better latch than say the engle slide. Also, it has a double slide , so it will come out 100 % of the way, where others only come out about 80 %, which makes it hard to lift the lid of the fridge.

Drifta Single draw combo dsd c $AUD 660
This is our new single draw combo. It has a draw made to size to suit your vehicle, with a spot for out drifta table above it. Inside the draw and the whole box is lined with a bootliner carpet. The draw comes with a lockable flush fitting lock, and one moveable divider in the draw. These are made to be taken in and out. We don't fit them. If you want it bolted in, you can easily do that. Or put a strap over the top. The draw is 0.5 in ply, blackened and lacquered, and runs inside a carcus of the same material.. It has no draw runners, but slides very easy, actually better than with draw runners! The whole thing weighs less than 44 lb. We can make this in any size/ combination. Just measure the width/height/length you want, and we can make it up.
How about this! This is the best table you can buy in Australia. But it's always hard to find somewhere to fit it. Here is sits snugly above the draw, it won't move or rattle, as it's sitting on strips of carpet inside. Also for a quick stop, pull it out halfway, for a handy table. Or, lift it right out, fold the legs down to have a perfect drifta table.. it has fully adjustable legs, can go from 19.7 ins - 35.4 ins in height, is about 23.6 ins x 37.4 ins x 2.0 ins in size. 0.5 in ply table top, with a quality laminated granite top.

DRIFTA SINGLE DRAW DSD $ AUD 460
DRIFTA SINGLE DRAW
DIMENSIONS - CUSTOM BUILT TO ANY SIZE.
STANDARD FOR PATROL/ LANDCRUSIER
1050 X 450 X 300HIGH
LOCKABLE, FLUSHFITTING FRONT LATCH.
BOOTLINED CARPET INSIDE DRAW/ COMPLETE OUTSIDE.
VERY LIGHT, 15 KGS.
NO NEED TO BOLT IN PLACE. STRAP IT DOWN IF YOU WANT TO
PERFECT NEXT TO YOUR FRIDGE, OR DCB KITCHEN
FREIGHT THEM ANYWHERE IN AUSTRALIA..
This is our new drifta single draw . (shown on the right, with a car back kitchen on the left) after building nearly three hundred car back kitchens, we have been getting lots of people wanting all sorts of draws etc to go with them, something that the market doesn't currently cater for. So , now, each different style we make, I'll put it on the web.  
Our drawers don't have runners. Just plastic skids underneath. They slide very easily, won't rattle, are very light, and can be custom made to suit any size. Each draw comes with one divider. Makes a perfect set with our single draw kitchen, or car back kitchen. see DCB/DVB PAGE The main market we have found, is people wanting to lift their drawers out. these can easily be lifted out when you're not using them.. you don't really need to carry all your heavy recovery gear with you to do the shopping or drive to work.

TROOPY FITOUTS

Click photo for info on our troopy drawer units
We’re doing lots of troopies now also. Most of these people come here say Monday, camp the night, and we’re done Tuesday arvo. Click the photo to see more of our troopy drawer systems.

See also here, for our range of van fitouts/ drawers units.