DRAWER ACCESSORIES

  • Most of the time we now build the DSS into the D2DWT unit like in these photo's....so you have the table on one side and the slide on the other. Can be built either way around, and normally I'd make the overall height of the unit around 300mm to increase the internal height of the drawers. It works really well being able to pull the fridge out and unload items onto the partly slid out table next to it.

     

    View-4wd-Camping-products

  • This strip can go on any of our drawers, and helps protect the carpet edge, looks great too! It’s made of polished aluminium checkerplate, and is just screwed on the top edge. It’s not sharp at all, so won’t cut into anything.

     

    View-4wd-Camping-products

  • How good is this! We can make a small insert drawer, that sits on the top of any drawer. We put small plastic ‘rails’ on the sides of the drawer, and this small drawer can slide forward or back. It’s great for small items. Still room underneath for other things.. 

     

    View-4wd-Camping-products

  • These fridge dividers are great. When you have your vehicle fully loaded, stuff will be stacked up against your fridge, then when you pull the fridge out, often it can fall into the space left... this can be a real pain, as you’d have to climb in to fix it up... so this simple ‘fridge divider’ , screws or bolts to the top of the drawers, and prevents this happening.. 

     

    View-4wd-Camping-products

  • You can add some handy little lightweight strapping points to the top of your drawer unit – there are 2 types available – flush, and surface mounted….

     

    View-4wd-Camping-products

  • These are the panels that fit below the side wings to blank off the ends besides the drawers (looking from the rear of the vehicle). They are a semi-permanent fixture and create a contained storage area beneath the side wing..and also give the drawers a more finished look.

    Most vehicles (2 panels) $80
    Infill kit (2 panels) $50
    NOTE – prices may vary on large/high drawers

     

    View-4wd-Camping-products 

  • Built in water storage is becoming more and more popular, so we’ve developed a few different tanks (poly and stainless available) that we build into our drawer systems so you get the convenience of easy access water whilst maintaining the neat stylish finish of a Drifta set-up. 

     

    View-4wd-Camping-products 

  • Drifta is now one of the largest distributers in Australia of drop down fridge slides. WE STOCK ALL SIZES of slide by the 2 manufacturers….MSA   and also  EASY SLIDE (Clear View)….Both brands work really well with all Drifta drawers systems, and they make life much easier when you need to grab something cold….!

     

    View-4wd-Camping-products View-4wd-Camping-products

  • We seem to be getting an increasing demand for cargo barriers these days - they are a great benefit in any wagon I reckon as it gives you peace of mind that all the gear in the back will stay in the back (!!) no matter what may happen when you're driving down the road or in the bush. The barriers we use are the Autosafe barrier, and the fixings are modified so that wherever possible they attach to existing points you have in the vehicle, so minimal drilling - which is what everyone wants!! 

     

    View-4wd-Camping-products

  • This is the recently developed DST – a full area sliding top that bolts to the top of your drawer system. Its very sturdy and capable of holding 150kgs plus. Ideal when you carry a lot of gear that you need to get to all the time…the DST slides out so saves you having to climb in!! Custom made to fit any vehicle, with runners that lock in, out and half-out….plus the whole assembly can be unbolted from the drawers if needed…..

     

    View-4wd-Camping-products

  • Lockable, hidden security box that can be built into the back of the drawer unit. Access is gained by rolling second row of seats forward – this option gives you a great place to stash your valuables ….out of sight!

     

    View-4wd-Camping-products

  • The Bed Base Extension is a pair of add on boards that attach to the front of your Drifta units and create a full flat area right up to the back of the front seats. This space can be used as extra storage, a place to sleep - or whatever suits you! Made as a 2 part so its easier to fit - the BBE clips to the back of the drawer unit and has fold down legs to support the front end. 

     

    View-4wd-Camping-products

  • This is a standard carback combo in an 80 series. The carback kitchen is on the right. Now with the new swap drawer, you can pull the carback kitchen out, and put in the swap drawer. 

     

    View-4wd-Camping-products

  • ($190 FOR TWIN CAB)
    SIDEWING KIT $100
    ($110 FOR TWIN CAB)

    This is our new sidewing system.. we used to just screw these grey metal brackets on, but they were very hard to put on, and if you wanted to lift the drawers in and out, as some of our customers do, then it wouldn’t fit out the doors, once the brackets were on..

     

    View-4wd-Camping-products

  • Click below for more details on our rapid wing 270 degree awnings. We can do them passenger side or driver side.

     

    View-4wd-Camping-products

  • We are now making a large range of canvas products. We can also make small custom jobs. Click below to view products.

     

    View-4wd-Camping-products

  • These are our new wheel covers, got them for our own trucks and the trailers, but yeah they look great, and few people have been wanting one.. so I’m happy to sell them at my cost price, $75 each.. so if you love your 'Drifta' product, and want to have one of these covers, let me know.. ta luke

     

    View-4wd-Camping-products Add to cart

  • (including Anderson plug connector we fit, not supplied standard, worth about $20) Projecta are coming out with some great products, and this is one of them..folding flexible solar panel, and very reasonably priced.. size: 2200x500mm folded out 370 x 500 x 100 mm folded up weight 7kg

     

    View-4wd-Camping-products Add to cart
  • We can supply, or supply and fit the Redarc range products, also Bainbridge technology products, such as the Baintech DC power boards.. we have a fully qualified Auto Electrican working for us full time installing these products into 4wd’s, particularly when drawers are being fitted..

     

    View-4wd-Camping-products

  • FITS ALL VEHICLES !!

    The drifta fridge box can be made to go with the vertical combo, or the drifta two drawer vertical. It’s a separate box, made from 12 mm ply, with a 15 mm top. Has holes in the back for ventilation. It pretty much is built around the fridge slide, and would bolt onto the vertical drawers. Fridge slide is not included, we can do waeco, ORS or the drop slides. Click photo for more details on slides. 

    View-4wd-Camping-products