I make these to order and have the measurements here for all trucks so every unit is millimetre perfect for the space you have. They FIT WITH or WITHOUT A TUB LINER (check measurements when a tub liner is installed) and are a must for any dual cab! This system offers heaps of storage, Drifta’s unique slide out table plus easy access to the fridge – and at a very reasonable price! Fridge slides and water tanks also available…email me with any questions…. [email protected] …. Cheers, Beechy….
Price Includes:
1 full length drawer plus removable table
Hatch/box between fridge and cab (perfect for auxiliary battery!)
Lift off side wing KIT (instructions provided)
Options:
DSS (built in) fridge slide
Drop in panel / Drop on fridge box
Aluminium strip, insert drawers
Fitting unit and cutting in side wings costs at Drifta HQ, or freight available
Many great add on options for this system – see photo’s / info below
TO ORDER – need to know
What vehicle / year model truck?
Does it have a plastic tub liner?
What fridge you have (make/model)?
Which side the fridge is to go?
Drawer Accessories
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
click here for more details
This is the drawer / table / fridge unit + slide out table + side wings. Drifta’s stylish design and high quality finish, with this system the fridge is set down low – so easy to access on a standard (non drop) fridge slide. The fridge can go EITHER SIDE.
We mainly use the Drifta DSS (built in) fridge slide with this system – the DSS can be made to the EXACT size needed so maximizing your storage around the fridge – plus the DSS is very neat and light weight. If you already have a fridge slide then that can also be used.
Next to the fridge you get a FULL LENGTH storage drawer…so bringing your stored gear out to you. This drawer is very big…you can see there is no wasted space thanks to our Teflon slide system – so we save space, weight and of course cost by doing away with normal roller runners – and Drifta drawers slide very free and easy.
The teflon runners can be seen here – very simple design, but very effective. And all the weight is sat directly down so very strong, unlike with runners where the weight is suspended off the sides and can fail.
The table is unique to Drifta and fits above the drawer so is always ready to use and easy to get to. The table can be used half slid out like this…..
…or can be set up free standing with the full set of steel legs attached to the bottom. Solid 12mm laminated top and fully adjustable…its one of our most popular features. If you don’t want the table, let us know and we’ll reduce the price of your order.
Between the fridge and the cab there will be some space, so we box this in and make a lift off lid so creating an extra storage space there.
This is an ideal spot for an auxiliary battery (a battery is heavy so good to have it central between the axles) – or you can put whatever you like in here really.
I have to send the side wings out as a KIT (interior profiles vary). The KIT is everything you need including instructions so you can just cut the boards to shape and wrap the carpet around. Its pretty easy to do (instructions provided)…
….or if you come here for installation at our workshop then I’ll fit the side wings for you, no worries.
HERE’S SOME GOOD ADD ON OPTIONS …..
Drop in panel
Here’s a photo with the fridge removed. You can see the optional drop in panel – so making a completely flat deck when the fridge is removed. The panel just sits in place so very easy to use, and the DSS can still be operated…so its very handy.
This makes the system very versatile…gives you more usage options. This panel simply drops in / lifts out, so very quick and easy.
Removeable fridge box / surround
Another good idea – this photo shows the REMOVABLE fridge box/surround that we can also make up – so the bolt on box can quickly/easily be attached when the fridge is being used…then removed again when the fridge taken out.
You can see here how the box secures to the main unit with bunjy’s – so very quick and easy to secure / remove as needed. You can have both the box/surround plus the drop in panel – the unit can be made to fit both options so giving you max options of how to use the space in your truck!
Having the box/surround means you can stack gear all around the fridge – essential when on them longer trips.
And we put some ventilation holes in the back to allow good air flow all around the fridge.
Bolt on / off box
Also available is this removeable box that bolts onto the slide – so when the fridge is removed you can use the slide as a drawer.
The box and slide closes up neatly, and then you can drop in the flush panel above and you quickly turn your slide system into a 2 drawer system!
Works well with the fridge box/surround above also.
The box bolts into captive nuts that are in-bedded in the main fridge slide board, so very quick and easy.
Low profile drawer below fridge
The drawer slides out totally independently of the fridge slide, so if the drawer is already open you can still slide out the fridge above.
Including this drawer option raises the fridge up a further 125mm in height (plus the standard 65mm the fridge is raised just by the DSS slide and base panel of unit, so 180mm total height to base of fridge).
This low profile drawer can be added below the fridge (same length/width as fridge recess)….it measures 95mm high internal – ideal storage for small items, tools, etc… and a good way to use more of the available space on the fridge side of the vehicle.
The drawer runs on our standard Teflon runner system (where as the fridge runs on the HD stainless steel runners).
The low profile drawer is compatible with ALL other parts of the 3in1 system….so can create this neat 3 drawer set-up as well as the other configurations – so it is now actually a 4in1 …!!!
So if you want a completely changeable system with maximum layout options this is what you need. Drifta innovation at its best!
Slide out prep bench
Note – available in silver or black finish – please confirm when ordering.
This prep bench is built into the DSS fridge slide. It has a laminated top and slides out on heavy duty ball bearing runners.
The bench can be used whether the DSS slide is open or closed – slides out in seconds so very handy when loading your vehicle / fridge.
The extended bench comes with a support leg – this is only really needed when heavy loads are on the bench
The leg quickly and neatly hinges away on the underside of the slide so very user friendly.
The DSS fridge slide can be operated normally with the bench included – same operation of the DSS fridge slide.
All packed up looking good – stores away 100% neat. Instant set-up and instant pack up…this bench is a great addition to your Drifta system :)
Many more accessories…
This shows the optional tailgate board…these can be carpeted like this, or laminated the same as the table top. For additional options – CLICK HERE FOR DRAWERS ACCESSORIES PAGE
If you’re looking for water storage I can build in a tank…I have poly tanks and stainless steel tanks – and they are hidden below the top deck of the unit so out of sight and well protected! Email me for details…. [email protected]
I also do lots of custom work so if you’re looking for something a little different just email me (Beechy) and I’ll work through it with you….
This is the Drifta Hilux…she’s got a 2” lift, Toyota bar, ARB rack, CSA rims with ST MAXX tyres, Safari snorkel…and of course a ripper set of Drifta drawers in the back!!
TO ORDER
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……Email the Drawers team here. Email Beechy here.
MORE INFO
Got a question? Check out our FAQ PAGE for more info.
FREIGHT
Check out our FREIGHT PAGE for freight charges HERE
10% discount on DRIFTA STOCKTON gear!
More Info