If you carry a fridge on top of your drawer system – then you’ll benefit heaps from having a FRIDGE DIVIDER. The fridge divider allows you to load the back of your vehicle with gear without obstructing the fridge sliding in/out and keeping good air flow/ventilation – plus it stops your gear falling into the fridge space (and saves climbing in there to clear it out the way!).
These are the LASER CUT ALUMINIUM fridge dividers that we offer – they bolt on top of your drawers and we use captive nuts so can be easily removed if/when required. Available for LHS or RHS fridge – and different sizes to suit any vehicle and any fridge slide. Laser cut with the Drifta logo so everyone knows you got the top notch gear!
WAGON – 1 piece / side panel – $145
With all 4wd wagons you only need the fridge divider along the one side of the fridge – there’s no room for the back panel due to the angle of the seats/cargo barrier. The side panel has the little return along the lower rear to give it extra stability.
Available as a LHS or RHS in 2 lengths (750mm / 850mm) – see schematic diagram for full measurements.
Beechy can advise most suitable when placing your order.
NOTE – need to drill / install the fridge divider AFTER drawers are installed
DUAL CAB – 2 piece / side + rear panels – $195
With having the extra length in a dual cab then its best to have the fridge divider along the one side + rear of the fridge. This allows you to load up along side and behind your fridge whilst still keeping your gear at bay.
Available as a LHS or RHS in 2 lengths (750mm / 850mm) and 3 widths (425mm / 500mm / 600mm) – see schematic diagram for full measurements.
Beechy can advise most suitable when placing your order.
NOTE – need to drill / install the fridge divider AFTER drawers are installed
Drawer Accessories
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
TO ORDER
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……
[drifta-custom-contact-mark]MORE INFO
Got a question? Check out our FAQ PAGE for more info.
FREIGHT
Check out our FREIGHT PAGE for freight charges HERE