SETTING UP DETAILS FOR DRIFTA 2 DRAWER - D2D..
This is our new Drifta 2 Draw. We can make them to fit all vehicles. Sits neatly between the wheel arches. Very strong, very light. Lift it in or out, or leave it in.	Our drawers don't have runners. Just plastic skids underneath. They slide very easily, won't rattle, are very light, and can be custom made to suit any size. Each draw comes with one divider.
We don't fit these drawers. No fitting really required. Just slide them in. they will be a tight fit between the wheel arch, and back door- seats/ cargo barrier. Strap it down if you want to, or use some turnbuckles to existing mounts.	These are a basic, budget drawer unit.. we don’t generally fit them, or scribe into the side over the wheel arches. There is a spring bolt at the rear to stop the drawer coming all the way out. See faq page for more on this.
Here are some examples we have done recently. This one a bloke wanted to put his spare tyre in the draw. (gas tank underneath, didn’t like the swing away carrier in carparks)	Here is a narrower on, with the drawers different size. This bloke wanted an internal width of 400 in one of the drawers..
Here is a small set, we did these for 100 bucks off. They were 800 x 800 x 200.	This is the single draw. These are very popular, often someone wants to keep one of the back seats in place (the 7- 8 seater wagons)
This Drifta 2 drawer unit was in I think a Mitsubishi outlander.	Here is a shot of how it was fixed in place. A tie down point is bolted on the side.. a turnbuckle is used to an existing tie down point. This is a quick and easy way of securing it.