| DRIFTA 2 DRAWER VERTICAL - D2DV SETUP |
|
 |
 |
| Each draw comes with a moveable divider. You can screw these in place where ever you like. |
The drawers come with a lockable front catch. |
 |
 |
| Another thing our drawers can do, is you can pull them right out. This makes it easy to get in and clean them out from time to time.. also, if you want to lift the whole unit out, then pull the drawers out first, the carcass is then only about 10 kgs. |
See the plastic strips we use.. These strips run on each other. They are rebated into the ply. We put some silicon spray on the skids. They slide extremely well. You won't believe how well they slide. |
 |
 |
| Here is a photo from inside the draw, looking up at the rear spring bolt. This stops the draw coming right out. |
Then if you slide the bolt down, it can lock in the down position, so you can then easily pull the draw out.... |
 |
 |
| The D2D is only about 25 kgs. Easy enough to lift in and out on your own. |
I spent years driving around in an old 82 then 92 model troopy, dreaming about having a turbo as it was sitting on 75 kms/ hr up the freeway.. now, look at this, my first new truck ever.. the V8 is an amazing motor. Very good on fuel, and an enormous amount of power. |
|
| DRIFTA 2 DRAWER VERTICAL WITH TABLE ON THE SIDE - D2DV-WTS |
 |
 |
| Here's another variation of the D2DV. Called the D2DV-WTS (Drifta 2 Draw Vertical With Table on Side) |
Same as the Drifta 2 Draw Vertical, just with the table sitting on the side.. |
 |
 |
| The table is a great addition, it's always really the no.1 accessory when camping. Finding a good one , or a place to put it is always tricky. |
This table can easily pull out and set up in minutes.. |
|
|
|