This is the Ford Everest package…specially designed to fit and work in this truck. I can also get water tanks and fridge slides so let me know if you need any of these. Thanks, Beechy….
All installation hardware with easy access cut outs
Optional aluminium strip $50, insert drawers $60 each
Fitting is $125, or freight available
THE UNIT TO SUIT THE 5 SEATS AND 7 SEATS MODEL (3rd row of seats removed) ARE THE SAME DRAWER UNIT – BUT THE 7 SEATS MODEL (3rd row of seats removed) REQUIRES THE FLOOR REPLACEMENT PANEL – PRICE DIFFERENCE NOTED BELOW.
NOTE – YOU CAN BUY THE FLOOR REPLACEMENT PANEL SEPERATELY – EMAIL BEECHY FOR DETAILS… mark@drifta.com.au
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..click here for more details
5 SEAT model – $1525
This is the system that I’ve developed for the Ford Everest. Drifta’s stylish design and high quality finish, plus custom made to the exact size of your truck. This unit measures 1000W (1090 top) x 970D x 275H (height can be altered)
You can see how there is no wasted space by using our Teflon slide system – so we save space, weight and of course cost by doing away with normal roller runners – and Drifta drawers slide very free and easy
The table is unique to Drifta and fits above one of the drawers so is always ready to use and easy to get to. It can go on either side (normally opposite side to the fridge if you’re carrying one) and can be used half slid out like this…..
…or can be set up free standing with the full set of steel legs attached to the bottom. Solid 12mm laminated top and fully adjustable…its one of our most popular features. If you don’t want the table take off $150 off the price.
The drawers go FULL WIDTH between the wheel arch’s so maximizing full use out of all the space that you have available….
…. there’s not really any need for lift off side wings – I just extend the top over both sides to neaten it up and fill the gaps so things don’t roll down there.
Installation is simple – we provide the hardware…simply bolt some tie down points into existing holes (where the seats originally secured) and then the unit hooks on with turnbuckles like shown here – easy!
Here’s one with the built in (flush) DSS fridge slide – I make this slide to suit any fridge and its very neat/compact.
7 SEAT model (3rd row of seats removed) – $1775
The 7 seater system is the same unit, but we mount the unit on top of a floor replacement panel (adds to price). The Floor panel bolts to the vehicle into the existing holes (no drilling).
With the seats removed the vehicle floor is very uneven, so the floor panel makes it flat/level so the drawers sit nicely…then the drawers simply bolt directly to the panel (captive nuts).
The floor panel in the Everest is very neat, so you can leave it in there even if the drawers are removed – looks like this.
We do sell the floor panels separately too….
MORE OPTIONS / INFO…..
You can also add a drop down style fridge slide to the top…here’s a DS40 slide – see how its opposite side to the table…this is so you can drop the fridge down, and still slide the table out at the same time (works with the DS40 only, DS50 & DS60 are too wide to do this…)
And the fridge divider works heaps well…means you can load the back up and keep the fridge free and un obstructed
We put a cut out in the base and cut the central support back so you can access the spare wheel.
So when the spare is needed the drawer is removed and you can use a ratchet and socket to access the wind down bolt to drop the spare.
The fronts of the drawers overhand the central support to hide the fact that its cut out – just makes it look neat.
Here’s a photo with the drawer in the closed position.
#2 STYLE SYSTEM – KEEP THE FRIDGE DOWN LOW
(NOTE – this system only available by emailing Beechy mark@drifta.com.au )
Here’s one of our wagon #2 style systems in the Everest – so you have one drawer + table…then the fridge down low next to the drawer.
This system works well in the Everest as there is limited height on top for a fridge – so you can still use a taller fridge with this style of system.
You can include the optional drop in panel to make a flat deck when the fridge is taken out – and the slide can still operate as a pull out bench / shelf for storage.
And another option is the REMAVABLE fridge box / surround – allows you to stack gear all around / on top of the fridge so you can really make full use of the space available!
VERTICAL DRAWER OPTION
(NOTE – this system only available by emailing Beechy mark@drifta.com.au)
2 drawers stacked + fridge in a permanent box.
The fridge can go either side, and this one is mounted on one of the Drifta DSS fridge slides.
The front and rear of the unit are stepped so you get maximum sized drawers and table…
….whilst also allowing for the complex shape of the interior of the Everest.
Here’s an alternative system which keeps the fridge down low and gives you a nice LARGE storage drawer plus the awesome Drifta table – click here for more info…!
If you need to keep the fridge down low but still want the convenience of 2 nice big storage drawers then this system might be the one for you! Built to suit ANY fridge and ANY vehicle (as possible) – each unit is custom made for every customer so what you get will be a perfect fit for your set-up.
Need some 12V work / accessories? We have a fully qualified and highly experienced autolec here at Drifta who can take care of any 12V requirements. Click here to see our range of 12V accessories and contact details for Drifta’s autolec
TO ORDER
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……