MADE TO SUIT BOTH – SIDE MOUNTED SUB AND FLOOR MOUNTED SUB
This is the Jeep Wrangler package…specially designed to fit and work in this truck. There are 2 slightly different units – one designed for the side mounted sub, and another designed for the floor mounted sub. The sizing is literally millimetre perfect, so makes full use out of all the space you have so biggest drawers possible – whichever model you have. This is a really neat little unit that fits a lot into the space…check it out. Thanks, Beechy…
Cut outs in the base for access to under floor storage (side mount sub only)
OPTIONAL:
Aluminium edge strip, insert drawer, flush tie down points, infills, plus much more….
Installation at Drifta HQ (Gloucester) or delivery to you
NOTE – this unit can also be adapted for the 2 DOOR Wrangler (rear seats removed) – contact me for more details…. [email protected]
Drawer Accessories
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
This is the system that I’ve developed for the SIDE mounted sub – JEEP WRANGLER (4 door model). Drifta’s stylish design and high quality finish, plus custom made to the exact size of your truck. This unit measures 880W x 760D x 275H (height can be altered)
You can see how there is no wasted space by using our Teflon slide system – so we save space, weight and of course cost by doing away with normal roller runners – and Drifta drawers slide very free and easy
The table is unique to Drifta and fits above one of the drawers so is always ready to use and easy to get to. The table can go either side, but if you’re going to carry a fridge in the back these need to be on opposite sides. The table can be used half slid out like this….
…or can be set up free standing with the full set of steel legs attached to the bottom. Solid 12mm laminated top and fully adjustable…its one of our most popular features. If you don’t want the table, let us know and we’ll reduce the price of your order.
You can see here how I can make the one drawer wider than the other – this means you get a wider table, so a really good option with the Wrangler as the unit is quite compact – works well!
The unit comes with cut outs in the base so that you can access the space beneath the drawers. You just simply slide the drawers out.
This is a good place to store a few spares, some tools or ropes/straps! There’s a good amount of space, so its essential that you can get to it…so I incorporate this mod into all Wrangler drawers
And another sneaky tip is to cut the rear plastic trim like this to allow access to the jack which can still be stored in the normal position :)
There are lift off side wings that fill the gaps around the sides….
…and on the drivers side there is a nice bit of space left down behind the sub woofer – perfect spot for a SECOND BATTERY to be fitted.
The unit comes with turnbuckles already attached so you can hook it down to 3 of the existing tie down points you have in the back there.
The 2 closest to the seats end up being underneath the drawer unit so I provide some extension brackets to access these easier.
FLOOR MOUNTED SUB
With the FLOOR mounted sub – JEEP WRANGLER (4 door model) – you get a wider unit..so bigger drawers + wider table. Drifta’s stylish design and high quality finish, plus custom made to the exact size of your truck. This unit measures 950W x 770L x 275H (height can be altered).
You can see how there is no wasted space by using our Teflon slide system – so we save space, weight and of course cost by doing away with normal roller runners – and Drifta drawers slide very free and easy
The table is unique to Drifta and fits above one of the drawers so is always ready to use and easy to get to. The table can go either side, but if you’re going to carry a fridge in the back these need to be on opposite sides. The table can be used half slid out like this…
…or can be set up free standing with the full set of steel legs attached to the bottom. Solid 12mm laminated top and fully adjustable…its one of our most popular features. If you don’t want the table, let us know and we’ll reduce the price of your order.
There are lift off side wings that fill the gaps around the sides….
…they neaten the whole thing up and give you a nice flat deck across the top.
A full fitting kit and instructions is provided, so self install is fairly easy…or we do it here at our factory in Gloucester, NSW
We build a lot of drawers for Wranglers these days…very popular truck.
HERE’S SOME OTHER IDEAS
Here’s one with a DSS (flush) fridge slide built into the top – just about the only fridge slide that will fit in the back of the Wrangler I reckon.
The Engel 40 is the only fridge that I know will definitely fit – most other are too long…and also the lid of the Engel hinges the same as the glass door of the Wrangler so you can open it up…
And the good thing about the DSS fridge slide is that you are left with a completely flat deck when the fridge is removed – a real advantage especially in a smaller truck like the Wrangler.
See here a dual battery system we installed (have autolecs on site) – the battery fits perfectly down the side of the drawer unit (I actually have to make the unit 10mm narrower so the battery fits in there!).
And then the Baintech panel sits above the sub – these panels are great with the volt meter, 2 x cig outlets and 2 x USB. Such a neat set up in the Wranglers – very popular.
Thanks for looking…any questions call or email… [email protected] …Cheers, Beechy
Here’s an alternative system which keeps the fridge down low and gives you a nice LARGE storage drawer plus the awesome Drifta table – click here for more info…!
If you need to keep the fridge down low but still want the convenience of 2 nice big storage drawers then this system might be the one for you! Built to suit ANY fridge and ANY vehicle (as possible) – each unit is custom made for every customer so what you get will be a perfect fit for your set-up.
12V FITOUTS
Whatever 12V work you need doing there’s no job too big or small for our autolec team at Drifta! We specialize in wiring up 4wd’s and vans to suit the camping and 4wd industry – so we can advise you on what you need and what will work best for you.
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……
[drifta-custom-contact-mark]
MORE INFO
Got a question? Check out our FAQ PAGE for more info.
