Optional aluminium strip, insert drawer, flush TDP’s and more…..
Fitting at Drifta HQ (NSW), or freight available
The Landrover Defender drawer system is sized to fit this vehicle perfectly. A max width drawer with custom panels to cover over the wheel wells – you end up with a complete flat deck from left to right, so giving you handy drawer storage plus a more usable space on top for other gear.
PLEASE NOTE (applies to delivered units only) – due to small differences with the interior of different model Defenders, the side panels are shipped ¾ finished as shown in this photo – so once you have installed the main unit you will need to finish profile cut the one end of each board and then finish apply the carpet. We can install here at Drifta HQ in Gloucester, NSW…and would take care of this for you, but all delivered units will need to be finished off like this by the customer / installer.
DCBC (KITCHEN + DRAWER + TABLE) UNIT
KITCHEN ON RUNNERS
VERTICAL DRAWER SYSTEM WITH FRIDGE
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
Whatever 12V work you need doing there’s no job too big or small for our autolec team at Drifta! We specialize in wiring up 4wd’s and vans to suit the camping and 4wd industry – so we can advise you on what you need and what will work best for you.
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……