NISSAN R51 PATHFINDER - STORAGE DRAWER PACKAGE $1625

Price Includes:

2 drawer with table unit
Fixed sidewings
All installation hardware with easy access cut outs

Optional aluminium strip $50, insert drawers $75 each (was $60)
Fitting is $125, or freight available

This is the Nissan Pathfinder package…specially designed to fit and work in this truck. I can also get cargo barriers and fridge slides so let me know if you need any of these. Thanks, Beechy….

Drawer Accessories

We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..

click here for more details

This is the system that I’ve developed for the R51 Pathfinder. Drifta’s stylish design and high quality finish, plus custom made to the exact size of your truck. This unit measures 1000W (1120 top) x 1030D x 275H (height can be altered)

You can see how there is no wasted space by using our Teflon slide system – so we save space, weight and of course cost by doing away with normal roller runners – and Drifta drawers slide very free and easy

The table is unique to Drifta and fits above one of the drawers so is always ready to use and easy to get to. It can go on either side (normally opposite side to the fridge if you’re carrying one) and can be used half slid out like this…..

…or can be set up free standing with the full set of steel legs attached to the bottom. Solid 12mm laminated top and fully adjustable…its one of our most popular features. If you don’t want the table take off $150 off the price.

The drawers go FULL WIDTH between the wheel arch’s so maximizing full use out of all the space that you have available….

…. there’s not really any need for lift off side wings – I just extend the top over both sides to neaten it up and fill the gaps so things don’t roll down there.

The units comes with all the fixings and hard ware to secure it onto the existing tie down points in your Pathfinder, so when it arrives you can just lift it in and fix it in place. Here’s the turnbuckles by the rear door…

…and here’s the ones by the seats. You can see how I put cut outs in the back and side panels so you can reach in with your hand to tighten the turnbuckles – works well!

You can add any fridge slide to the top…here’s a DS40 drop down slide – see how its opposite side to the table…this is so you can drop the fridge down, and still slide the table out at the same time (works with the DS40 only, DS50 & DS60 are too wide to do this…)

And the fridge divider works heaps well…means you can load the back up and keep the fridge free and un obstructed

You can get any of the Drifta systems in the back of the Pathfinder – here’s one with a 2 drawer vertical with table and fridge box….

…this is a very neat set-up, and the unit is built millimetre perfect to suit the vehicle and the fridge – so getting maximum use out of all the space available!

This is the cargo barrier that I get made for the R51 – it’s full frame/half mesh barrier. This means its easy to install, and you still get full length drawers/table with better access around the back of the unit.

Fits all models of Pathfinder – email me for more details… mark@drifta.com.au …Cheers, Beechy!

OTHER DESIGNS TO SUIT THIS VEHICLE….

The 3 In 1 Modular Unit Combines W1 W2 W6 01

THE “3 IN 1” – MODULAR UNIT – COMBINES W#1, W#2 & W#6! (FROM) $2390

This revolutionary drawer system covers all requirements – combining 3 of Drifta’s most popular drawers systems in the one build. Modular sections so it can be easily / quickly converted from one style to the other. If you use your 4wd for lots of different uses, or just can’t decide which system suits you best – then this is the system you need!

More Info

WAGON #2 – DRAWER / TABLE / FRIDGE PACKAGE

Here’s an alternative system which keeps the fridge down low and gives you a nice LARGE storage drawer plus the awesome Drifta table.

More Info

WAGON #3 (DCBC) – KITCHEN (freestanding) + DRAWER + TABLE (from) $1795

The DCBC (Drifta Car Back Combo) unit has the convenience of a nice large storage drawer + the Drifta slide out table….then we build in the SD-DCB style removeable kitchen on the other side. The kitchen has a nice long fold out bench with laminated top, plus heaps of internal storage for your cooking gear. Also worth checking out the swap drawer option which fits in place of the kitchen – converts this system into a WAGON #1 (2 drawers + table unit)!

More Info

Wagon 4 Kitchen On Runners No Legs Lifting Drawer Table01

WAGON #4 – KITCHEN (on runners, no legs/lifting) + DRAWER + TABLE (from) $2265

This system is similar to the DCBC above so you get a large general storage drawer + slide out table….but the kitchen is modified with built in stove space/drawers/storage….plus the kitchen SLIDES OUT QUICK AND EASY thanks to the heavy duty STAINLESS STEEL RUNNERS. Fully self supporting…the kitchen slides out with no lifting required – then auto locks out and is ready to use!

More Info

WAGON #6 – VERTICAL DRAWERS + FRIDGE BOX

If you need to keep the fridge down low but still want the convenience of 2 nice big storage drawers then this system might be the one for you! Built to suit ANY fridge and ANY vehicle (as possible) – each unit is custom made for every customer so what you get will be a perfect fit for your set-up.

More Info

12V FITOUTS

Whatever 12V work you need doing there’s no job too big or small for our autolec team at Drifta! We specialize in wiring up 4wd’s and vans to suit the camping and 4wd industry – so we can advise you on what you need and what will work best for you.

More Info

TO ORDER

Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……

EMAIL: mark@drifta.com.au
PHONE: (02) 6558 2328 (BH)
7 Lowe St Gloucester NSW 2422

MORE INFO

Got a question? Check out our FAQ PAGE for more info.

FREIGHT

Check out our FREIGHT PAGE for freight charges HERE

Drifta Newsletter

4WD DRAWERS, NISSAN + MITSUBISHI