This small kit is designed for us with the DPO or DPOR kitchens and also storage boxes… It is one kit so if you want to use it with a kitchen + storage box you need two kits…we have been making them the same way for many years, in that they pull out of the trailer on the legs, but leave about 150 mm still sitting on the trailer.. many people have wanted to free stand the kitchen/storage box at times, so this system has worked well.. the downside, is if you pulled it out too far, it will fall on the ground.. this has happened to a few people, it won’t damage the kitchen, but better if it doesn’t happen so you don`t get injured!! the storage boxes / kitchens can be very heavy.. so, this is the kit i have come up with.. drill a hole in the top of the kitchen, about 100 mm back. tap the captured nut in from underneath, attach the tie down point with the stainless bolt. The other tie down point, attaches to underneath the bed base (ply, use the 25 mm chipboard screw) or the steel support ( use the short metal thread) about 500 mm back from the drawer bar end of the trailer .. tie one end of about 1.8 meters of the rope (cut ,and burn the end) to this TDP, the other end can tie onto the S-biner.. adjust it to the correct length, wrap around a few times so it won’t slip, and then clip it on.. we have used a S-biner, so you can unclip it, and pull the kitchen out if needed… the supplied rope is very strong, won’t stretch, and light enough to not get in the way when the kitchen is pushed away.. also, it’s very handy stuff to have.. let us know if you’d like a set with your new/ existing kitchen/ storage box, or if you have any questions.
click the image for more info
Got a question? Check out our FAQ PAGE for more info.