The DSS is a high quality fridge slide made to suit any fridge and any style of Drifta drawer system.
* Flush / built in means instant flat top when fridge removed * Made to suit any fridge – perfect size and no wasted space * The lightest fridge slide on the market * High quality stainless steel runners – “lock in” and “lock out” function * Works great next to Drifta slide out table – easy to unload fridge * Custom made as required
PLEASE NOTE – WE NOW USE 2 x LOCKING SLIDES ON THE DSS FOR BETTER STABILITY (photo’s only show 1 lock)
The DSS is built in so completely flush with the top of the drawer unit – very neat, and means you get an unobstructed flat top when the fridge is removed.
The slide extends fully to give you good access to your fridge.
There is also a solid base below the slide so stops anything from falling into your drawer or getting caught up when operating the slide.
Its really handy having the fridge slide out next to your table – good to have a surface put things onto when unloading the fridge.
When the DSS is used we normally increase the unit height to 300mm – gives you good storage space inside the drawers.
We build the DSS to any size so it can be made to suit any fridge.
The DSS comes with surface mounted tie downs as standard like shown here, but you can upgrade to the flush tie downs for a complete flat surface.
If your DSS is going on top of a drawer system then the flush TDP’s are recommended, but if you have the fridge slide down low (see below) then the flush TDP’s are not so important (although they are neater).
The DSS can also be built into a fridge box like this. By using the DSS the fridge space can be made the perfect size to suit your fridge – so no wasted space, plus you get max width drawers + table next to the fridge.
Solid timber top with stainless steel runners..this is a great fridge slide system. And we can make the DSS to suit ANY FRIDGE!
Here’s another style of system the DSS can be used in – single drawer + table and fridge on the other side.
This is what we call the #2 system – check it out on the main “4wd fitouts” page.
You can also add a bolt on box to you DSS like shown here – handy for keeping gear contained on your slide when the fridge is removed.
The box simply bolts on/off into some captive nuts embedded in the slide, so very quick and easy!
Drawer Accessories
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……
[drifta-custom-contact-mark]
MORE INFO
Got a question? Check out our FAQ PAGE for more info.