TROOPY FIT OUTS

Troopies have always been very popular here at Drifta – whether you’re looking for…

  • BUDGET STYLE CAMPER / KITCHEN
  • TRADIES / WORK FIT OUT
  • ORGANIZED STORAGE SOLUTION
  • CUSTOM LAYOUT TO SUIT YOUR REQUIREMENTS
  • 12V INSTALLATION (aux battery / lights / inverter / 240V charger input)

…then Drifta can help!

The Troopy is a good big truck with plenty of space in the back – so there are lots of options with what system you can have. Whether you have rear seats, or a completely empty space…all our systems are built to order from scratch so we can customize measurements and design to suit your truck and what you need EXACTLY!  We work closely with you to come up with a solution that is functional and is within your budget. Plus we have a full time Autolec taking care of any 12V work you need doing – Drifta is the 1 stop shop for  all your fit out needs!

TO ENQUIRE….

Email me (Mark – mark@drifta.com.au) with some details of what you need – maybe even a sketch, install/delivery, and any other relevant info I might need. Then I’ll get back to you with some options and prices based on your requirements.

EXAMPLES OF DRIFTA TROOPY FIT OUTS

Below are some examples of Troopies we have fitted out…what we do is not limited to what is shown here, but these are some popular layouts and features which  work well so worth scrolling through the information to help you work out the layout that will suit you. There’s quite a few examples here so worth scrolling right through to the bottom to make sure you don’t miss anything!

EXAMPLE #1

This is a staple Troopy fit out we do – full false floor/bed from front to rear – 2 x drawers + table + front storage boxes/hatches
View-4wd-Camping-products

EXAMPLE #2

This is very similar to #1, but the layout allows for a fridge to sit on the floor in behind the drivers or passengers seat (drop in panel available when fridge not in)
View-4wd-Camping-products

EXAMPLE #3

If you have a BENCH SEAT in the rear, or simply don’t require the drawers to go full length then here’s some details on our standard 2 drawer plus table (optional) system…
View-4wd-Camping-products

EXAMPLE #4

The UNTIMATE TOURING package!Easy access slide out kitchen (self supporting), heaps of storage, slide out table and a nice flat deck to put a mattress.Everything you need-all accessible in seconds!
View-4wd-Camping-products

EXAMPLE #5

Touring package TAKE 2! This layout has a customized wall unit to the RHS with drawer/bed/storage on the LHS.
View-4wd-Camping-products

EXAMPLE #6

If you need to keep the fridge by the rear door – then we can make a unit like this with stacked drawers next to the fridge….plus the flat deck fight across the top (can be made full length, or shorter if you have seats, etc..).
View-4wd-Camping-products

EXAMPLE #7

3 drawers + table combo (optional fridge space to front)
View-4wd-Camping-products

REPLACEMENT SIDE / REAR DOOR PANELS

Often the internal panels of the Troopies get knocked about – these replacement panels we make are 4mm plywood covered in the same neat carpet that we use to cover the drawers.
View-4wd-Camping-products

OTHER EXAMPLES

Check out here for some examples of some other random fit out work we have done. Anything is possible here at Drifta so if you don’t see what you need just get in contact!
View-4wd-Camping-products


DOT FAQ

DRAWER ACCESSORIES

We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
click here for more details


REDARC GEAR, 12 V FITOUT

Need some 12V work / accessories? We have a fully qualified and highly experienced autolec here at Drifta who can take care of any 12V requirements. Click here to see our range of 12V accessories and contact details for Drifta’s autolec


TO ORDER

Beechy (mark) is our manager for all the 4wd drawers.. he handles all our enquiries, and all the construction and fitting. Much of our work is slightly custom made, or some majorly so. It’s amazing how many different sets / combinations of drawers we build each week.. there is pretty much nothing Beechy can’t work out for you, if you want something custom made… i’ve been extremely lucky to find Beechy, who is as passionate about our Drifta products as i am.. so, any enquires, questions etc, just send him and e-mail, or give him a call… thanks for your time, rgds luke

Contact-Mark EMAIL: mark@drifta.com.au
PHONE: (02) 6558 2328 (BH)
7 Lowe St Gloucester NSW 2422
Find-us-on-facebook

MORE INFO

Got a question? Check out our FAQ PAGE for more info.

FREIGHT

Check out our FREIGHT PAGE for freight charges HERE