From $3995 (average spend $4600)
Yet another great TOURING package from DRIFTA – this system combines pull out stove / fridge / bench on the RHS, with 2 drawers + table (optional) on the LHS…plus extra storage up the front thanks to the extra long length you get in a Troopy! Made to suit any stove and can be built to suit any fridge – although a smaller fridge is better as it makes use of the space more efficiently.
NOTE – external unit height is governed by what fridge you use – as a guide the finished unit height will be approx plus 120mm more than the height of the fridge.
Whats included for $3995
- FULL LENGTH unit – custom made to suit your requirements
- RHS – Custom made slide out with space for fridge + stove HD stainless steel runners – self supporting
- LHS – 2 LARGE storage drawers
- 2 small cutlery style drawers (below stove)
- Slide out BENCH (slides out from below stove – non removeable)
- 2 x lift off hatch / box at the forward end of unit)
- Lift off side wings above wheel arch’s (level with top of unit)
- Side wings to cover the wheel arch’s
- Installation KIT
- A great Aussie made product!
OPTIONAL ADD ONS…
- Slide out table (can be used as a bench, or set up free standing!) – RECOMMENDED!!
- Infills (fill gaps below side wings)
- Water tank
- 12V work
- Much more – see all optional accessories HERE!
Built to suit any stove, any fridge – each of these systems are custom made…so no 2 are the same! Here shown is a Weber and Engel, but whatever stove / fridge you have we can work around.
The baby Weber fits well, or a smaller style stove means extra storage / larger drawers below stove. With the fridge its best to have a low / narrow fridge if possible to maximize use of the rear of the space (although any fridge/stove can be worked with).
The 2 drawers below the stove are good for cutlery, utensils, etc..– if you have a smaller stove then maybe even plates/cups. The end bench is non removeable with just the 1 support leg (removeable table an option on LHS of this system).
The removeable table on the LHS is optional, but really it’s a must! Can be used part slid out an extra workbench, or removed completely and set up free standing on the ground (takes about 3 seconds).
The 2 LARGE storage drawers on the LHS are good for food, pots/pans, chairs, recovery gear….whatever you need – lots of storage space in these drawers. And the flat deck above everything – ideal for a mattress, or if not then more storage.
At the front of the unit we build in 2 boxes with lift off lids…again more storage. Or you can UPGRADE and make the access through 2 drop doors on the front (accessed by tilting front seats forward).
Something a little different – here’s a system we built recently with 2 fridges (no stove, etc) – just an alternative idea. Water tanks plus many other accessories also available – see HERE!
No fridge on slide out option…..
Here’s an alternative layout – this customer had 2 fridges mounted in behind the front seats, so the slide out for the stove we built in a kitchen style storage area – 2 drawers + a large cupboard with adjustable shelf (plus the 2 existing drawers below the stove). Still with all the great features of the standard design…just with the extra built in section next to the stove.
We have a great selection of accessories to go with our 4WD Drawers – fridge slides / sliding top, tie down points, water tanks, cargo barriers, aluminium edging, insert drawers, swap drawers, lock box, bed extension and more…..
Whatever 12V work you need doing there’s no job too big or small for our autolec team at Drifta! We specialize in wiring up 4wd’s and vans to suit the camping and 4wd industry – so we can advise you on what you need and what will work best for you.More Info
Mark Beech (Beechy) manages all vehicle fit outs at Drifta. He has many years experience and knows most vehicles very well so can offer you lots of advice and tips on what system could work best for you. Most of our standard vehicle systems can be bought online through our “ORDER NOW” function, and Beechy checks through all orders to make sure they will fit/work as needed. Anything more customized, or any questions – please contact Beechy and the drawer sales team – there is nothing they can’t help you out with! Thanks for looking……[drifta-custom-contact-mark]